Remote Controlled Sockets Light Switch

• Plug the Remote Socket into the wall socket and switch on the supply, the red LED will flash every second.
• If the LED is not flashing press & hold the manual ON/OFF button for 5 seconds until it Hashes
• Press any ON switch on the Remote Control for approximately 2 seconds and the Remote Socket(s) learn the code. The LED will stop flashing top confirm the code has been accepted.
• Any number of Remote Sockets can be programmed to one Remote Control ON button to create multiple switching.
• To programming Remote Sockets on different Remote Control ON buttons repeat the previous steps
• If the mains supply is turned off the Remote Sockets v/ill lose their code and it will be necessary to re-programme.

• Low battery in the Remote Control
• Distance too large between the remote control and the receiver (ensure the range distance is no more than 20 clear Metres) and free from obstacle that may reduce the distance.

1. The appliance is for household and indoor use only.
2. Before plugging in, check that the voltage on the rating label is the same as the mains supply.
3. To protect against electric shock, do not immerse any part of the product in water or other liquid.
4. This socket is intended for use by competent adults only and children should be supervised at all times.
5. Do not use the socket for other than its intended use.
6. This socket can be used by children aged from 8 years ages above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance Cleaning and user maintenance shall M be made by children without supervision.
7. Children of less than 3 years should be kept away unless continuously supervised.
8. Children from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in. regulate and clean the appliance or perform user maintenance.
9. Don't use this socket in the immediate surroundings of a bath, a shower or a swimming pool.
10. In case of malfunction, do not try to repair the socket yourself, it may result in a fire hazard or electric shock
11. Do Not Exceed Maximum 3680W
12. Place the LR44 batteries provided into the compartment in the back of the Remote Control, please insert as showed in the back of the compartment to ensure the polarity is correct.

Press the manual ON/OFF button for 5 seconds until the red LED flashes once per second to confirm decoding is successful.

Press the ALL OFF switch on the Remote Control for more than 3 seconds, the LED, flashes once per second to confirm decoding successful.